How to use the shock absorber of 4-axis CNC machining center
The four-axis CNC machining center solves the complex, precise, small batch, and multi-variety parts processing problem (Emerson). It is a flexible, efficient (referring to high-efficiency) automatic machine tool. , Which represents the development direction of modern machine tool control technology, is a typical mechatronic product. Compared with ordinary machine tools, the four-axis CNC machining center has higher machining accuracy (precision) and has a very stable (explanation: stable and stable; no change) machining quality. Therefore, the quality requirements of the operation and control personnel are relatively high, especially in terms of shock absorption devices, attention should be paid to the following methods of use:
1. After the machine is level, tighten the screw flat and fix it in a horizontal state.
2. Put the required horns under the foot holes of the machine tool and thread the screws into them. Hold the feet with nuts and place the nuts in contact with the machine tool. Shenzhen CNC machining CNC machining refers to machining with CNC machining tools. CNC index controlled machine tools are programmed and controlled by CNC machining language, usually G code. The NC machining G code language tells the NC machine tool which Cartesian position coordinates to use, and controls the feed speed and spindle speed of the tool, as well as functions such as tool changer and coolant.
3. Because of the creep phenomenon of Rubber, when the horn is used for the first time, adjust the machine level again after two weeks. CNC computer gong machining is an automatic machine tool equipped with a program control system. The control system can logically process the program specified by the control code or other symbolic instructions and decode it to make the machine tool move and process parts. It is also called CNC or CNC machine tool. Shenzhen CNC machining is actually a CNC milling machine. It is called "CNC machining center" in Guangzhou, Jiangsu, Zhejiang and Shanghai. It is an automatic machine tool with a program control system. , (NC machine tool) is the abbreviation of Computer Numerical Control Machine Tool (Computer numerical control), which is an automatic machine tool controlled by a program. The control system can logically process the program specified by the control code or other symbolic instructions, and decode it by the computer to make the machine tool operate and process the part. Cutting of raw materials into semi-finished products by tool cutting.
4. Adjust the machine level, the nut rotates counterclockwise, and the machine tool rises. The correct use of the shock absorber of a four-axis CNC machining center is very important. Therefore, it is necessary to firmly grasp (well known and applicable) the above four methods of use.